Customization: | Available |
---|---|
Type: | Seamless |
Technique: | Cold Drawn |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Some samples of related steel grade
GB | GOST | ASTM | BS | JIS | NF | DIN |
10F | 1010 | 040A10 | XC10 | |||
10 | 10 | 10,101,012 | 045M10 | S10C | XC10 | C10,CK10 |
20 | 20 | 1020 | 050A20 | S20C | XC18 | C22,CK22 |
45 | 45 | 1045 | 080M46 | S45C | XC45 | C45,CK45 |
30CrMo | 30XM | 4130 | 1717COS110 | SCM420 | 30CD4 | |
42CrMo | 4140 | 708A42 | 42CD4 | 42CrMo4 | ||
708M40 | ||||||
35CrMo | 35XM | 4135 | 708A37 | SCM3 | 35CD4 | 34CrMo4 |
Material Chemical Composition (%) | |||||||||
Steel Grade | Material Number | C | Si | Mn | P Max | S Max | Cr | Mo | |
ASTM A519 | 1010 | - | 0.08-0.13 | - | 0.3-0.6 | 0.04 | 0.05 | - | - |
1020 | - | 0.18-0.23 | - | 0.3-0.6 | 0.04 | 0.05 | - | - | |
1045 | - | 0.43-0.50 | - | 0.6-0.9 | 0.04 | 0.05 | - | - | |
4130 | - | 0.28-0.33 | 0.15-0.35 | 0.40-0.60 | 0.04 | 0.04 | 0.8-1.1 | 0.15-0.25 | |
4140 | - | 0.38-0.43 | 0.15-0.35 | 0.75-1.0 | 0.04 | 0.04 | 0.8-1.1 | 0.15-0.25 |
Standard | Grade | C | Si | Mn | S | Cr | Ni | Cu | V |
GB/T 8162 | 10 | 0.07-0.13 | 0.17-0.37 | 0.35-0.65 | ≤0.025 | ≤0.15 | ≤0.30 | ≤0.25 | "" |
20 | 0.17-0.23 | 0.17-0.37 | 0.35-0.65 | ≤0.025 | ≤0.25 | ≤0.30 | ≤0.25 | "" | |
35 | 0.32-0.39 | 0.17-0.37 | 0.50-0.80 | ≤0.025 | ≤0.25 | ≤0.30 | ≤0.25 | "" | |
45 | 0.42-0.50 | 0.17-0.37 | 0.50-0.80 | ≤0.025 | ≤0.25 | ≤0.30 | ≤0.25 | "" | |
Q345A | ≤0.20 | ≤0.55 | 1.00-1.60 | ≤0.025 | ≤0.30 | ≤0.30 | ≤0.30 | "" | |
Q345B | ≤0.20 | ≤0.55 | 1.00-1.60 | ≤0.025 | ≤0.30 | ≤0.30 | ≤0.30 | "" | |
Q345C | ≤0.20 | ≤0.55 | 1.00-1.60 | ≤0.025 | ≤0.30 | ≤0.30 | ≤0.30 | 0.02-0.15 | |
Q345D | ≤0.18 | ≤0.55 | 1.00-1.60 | ≤0.025 | ≤0.30 | ≤0.30 | ≤0.30 | 0.02-0.15 | |
Q345E | ≤0.18 | ≤0.55 | 1.00-1.60 | ≤0.025 | ≤0.30 | ≤0.30 | ≤0.30 | 0.02-0.15 | |
Q/BQB 203 DIN 1629 |
St37.0 | ≤0.17 | 0.17-0.37 | 0.35-0.65 | ≤0.025 | ≤0.020 | ≤0.25 | ≤0.25 | "" |
St44.0 | ≤0.21 | 0.17-0.37 | 0.50-0.80 | ≤0.025 | ≤0.020 | ≤0.25 | ≤0.25 | "" | |
St55 | 0.33-0.41 | 0.17-0.37 | 0.50-0.80 | ≤0.025 | ≤0.020 | ≤0.25 | ≤0.25 | "" | |
St52.0 | ≤0.22 | ≤0.55 | ≤1.60 | ≤0.025 | ≤0.020 | ≤0.25 | ≤0.25 | "" | |
CK45 | 0.42-0.50 | 0.17-0.37 | 0.50-0.80 | ≤0.025 | ≤0.020 | ≤0.25 | ≤0.25 | "" |
Standard | Grade | Tensile strength (Mpa) |
Yield point(Mpa) not less than |
Elongation(%) not less than |
Impact test | ||
≤16mm | >16-30mm | Temperature (°C) |
Absorbed energy (KV/J) |
||||
GB/T 8162 | 10 | ≥335 | 205 | 195 | 24 | -- | -- |
20 | ≥410 | 245 | 235 | 20 | -- | -- | |
35 | ≥510 | 305 | 295 | 17 | -- | -- | |
45 | ≥590 | 335 | 325 | 14 | -- | -- | |
Q345A | 470-630 | 345 | 325 | 20 | -- | -- | |
Q345B | 470-630 | 345 | 325 | 20 | 20 | 34 | |
Q345C | 470-630 | 345 | 325 | 21 | 0 | 34 | |
Q345D | 470-630 | 345 | 325 | 21 | -20 | 34 | |
Q345E | 470-630 | 345 | 325 | 21 | -40 | 27 | |
Q/BQB 203 DIN 1629 |
-- | -- | ≤16mm | >16mm | -- | -- | -- |
St37.0 | 350-480 | 235 | 225 | 25 | -- | -- | |
St44.0 | 420-550 | 275 | 265 | 21 | -- | -- | |
St55 | 540-645 | 295 | 285 | 17 | -- | -- | |
St52.0 | 500-650 | 355 | 345 | 21 | -- | -- | |
CK45 | 590-730 | 335 | 325 | 14 | -- | -- |
GOST 9567-75 | Chemical composition (%, max) | Mechanical Performance | ||||||||||
Steel grade | C | Si | Mn | Cr | Ni | Mo | S | P | Cu | Tensile strength, N/mm2 (min) | Yield strength, N/mm2 (min) | Elongation, % (min) |
10 | 0,07-0,14 | 0,17-0,37 | 0,35-0,65 | 0,15 | 0,3 | - | - | - | - | 343 | 206 | 24 |
20 | 0,17-0,24 | 0,17-0,37 | 0,35-0,65 | 0,25 | 0,25 | - | 0,03 | 0,025 | 0,3 | 412 | 245 | 21 |
35 | 0,32-0,40 | 0,17-0,37 | 0,50-0,80 | 0,25 | 0,3 | - | 0,04 | 0,035 | 0,3 | 510 | 294 | 17 |
45 | 0,42-0,45 | 0,17-0,37 | 0,50-0,80 | 0,25 | - | - | - | - | - | 589 | 323 | 14 |
15Cr/15X | 0.12-0.18 | 0.17-0.37 | 0.40-0.70 | 0.70-1.00 | 0.03 | - | 0.035 | 0.035 | 0.03 | 735 | 490 | 11 |
20Cr/20X | 0.18-0.24 | 0.17-0.37 | 0.50-0.80 | 0.70-1.00 | - | - | 0.03 | 0.03 | - | 835 | 540 | 10 |
40Cr/40X | 0,36-0,44 | 0,17-0,37 | 0,50-0,80 | 0,80-1,10 | 0,3 | - | 0,035 | 0,035 | 0,3 | 618 | - | 14 |
30CrMnSiN/30ХГСА | 0,28-0,34 | 0,90-1,20 | 0,80-1,10 | 0,80-1,10 | 0,3 | - | 0,005 | 0,025 | 491 | - | 18 | |
10Mn2/10Г2 | 0.12 | 0.07 | 1.5-1.9 | 0.2 | 0.3 | - | 0.035 | 0.035 | 0.2 | 480 | 400 | 22 |
15CrMo/15ХМ | 0.12-0.18 | 0.17-0.37 | 0.40-0.70 | 0.80-1.10 | - | 0.4-0.55 | - | - | - | 440 | 295 | 22 |
Chewit International
1. who are we?
We are based in Jiangsu, China, start from 2010,sell to Eastern Asia(20.00%),Mid East(20.00%),Eastern Europe(15.00%),Southeast Asia(15.00%),Northern Europe(10.00%),Domestic Market(10.00%),South America(5.00%),Western Europe(5.00%),South Asia(0.00%),North America(0.00%),Oceania(0.00%),Southern Europe(0.00%),Central America(0.00%),Africa(0.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Steel Pipe, Seamless Pipe, Hydraulic Oil Tube, Precision Tube, Stainless Steel Tube
4. why should you buy from us not from other suppliers?
Production: Advanced production line and drawing with special oil to make the surface in best condition. Lower roughness and good mechanical performance. Inspection before delivery: Professional team for inspection and randomly check
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,DDP,DDU;
Accepted Payment Currency:USD,EUR,HKD,CNY;
Accepted Payment Type: T/T,L/C,MoneyGram;
Language Spoken:English,Chinese,Spanish,Japanese